0
Thai  English
098 996 1504 (Hotline)

KNIFE GATE VALVE

KNIFE GATE VALVE

 ขอใบเสนอราคา

ขอใบเสนอราคา

ชื่อสินค้า
จำนวน
ชื่อผู้ติดต่อ
ชื่อบริษัท
เบอร์โทรติดต่อ
อีเมล
ที่อยู่
ข้อความอื่นๆ
   
เราคือผู้จำหน่ายวาล์วอุตสาหกรรมทุกชนิด ทุกประเภท มีให้เลือกหลากหลายรุ่น สินค้ามีความแข็งแรง ทนทาน คุณภาพสูงได้มาตรฐานสากล พร้อมบริการหลังการขายและการให้คำปรึกษาโดยทีมงานวิศวกรที่มีความเชี่ยวชาญเฉพาะด้านเพื่อให้คำแนะนำในการเลือกใช้วาล์วให้เหมาะสมกับลักษณะการใช้งานของท่าน
 
  • KNIFE GATE VALVE HANDWHEEL RISING STEM WAFER TYPE PN10
  • BODY : CAST IRON
* Other specs are available upon request.
APPLICATION - The knife valve is particularly suitable for the most difficult applications.
- Area of use : water treatment networks, pulp and paper industry, chemical plants, winemaking, cement works, pneumatic transport, storage.
- Fluids : water, sewage, pulp, pasty products, powdery, granular, fibrous, abrasive and crystallizing.
GENERAL CHARACTERISTICS
- Range: DN50 to DN600.
- Knife Gate Valve on/off or regulation with rising stem.
- Molded monobloc body
- Unidirectional water tightness: Flow direction indicated on the body with an arrow.
- Installation between flanges ISO PN10.
- Small retention zone.
- Gate with a beveled cutting edge guided in the body with little backlash.
- Guaranteed closure, without risk of blockage.
- Standard polished gate, soft contact with the gaskets.
- Very resistant ductile iron packing flange avoids risks of breaks.
- Operating force reduced thanks to the elasticity of the gaskets.
- Pre-formed profiled sheet metal support plates from DN50 to DN300 for accessory or kit mounting.
- Full flow when fully opened, ensuring a high flow rate with low head loss.
- Flow regulation possible for pasty or abrasive fluids with installation of a deflector.
WORKING CONDITIONS
- Maximum working pressure: DN50-250 : 10 bar, DN300-450 : 7 bar, DN500-600 : 4 bar
- Maximum working temperature : -10°C / +80°C (NBR joint in standard)
ย้อนกลับ
สอบถามข้อมูลสินค้า
Top